|
|
Post by speedysteve on Nov 26, 2020 12:20:14 GMT
I updated.
Still got a weird one where in Spotify I press for a track, but get the next one in a playlist, or album!
Pressing the preceding one plays the one I wanted!
Very strange.
|
|
|
|
Post by MartinT on Nov 26, 2020 12:29:22 GMT
That... is strange. I rarely use Spotify except to fill in for something missing in Qobuz, but still often enough to know that I've never seen this happen.
Worth reporting, I think.
|
|
|
|
Post by John on Nov 26, 2020 15:24:38 GMT
I prefer using Spotify via connect than the Spotify playlist in volumio, a lot nicer to navigate.
|
|
|
|
Post by MikeMusic on Nov 26, 2020 15:35:06 GMT
I updated. Still got a weird one where in Spotify I press for a track, but get the next one in a playlist, or album! Pressing the preceding one plays the one I wanted! Very strange. This is what is called Technology  |
|
|
|
Post by MartinT on Nov 30, 2020 19:02:41 GMT
More good work with the back end.
Adding a track to a Qobuz playlist appears immediately in Volumio. Nice.
|
|
|
|
Post by naim1425 on Dec 1, 2020 18:21:17 GMT
Can you put the volumio img. On a 32 gig sd card,I’m trying to put the new image on it and when I install Spotify plugins after it’s finished,I rebooted the digione it just does not load up
I’ve tried quite a few times still doesn’t work.,the curser just spins and goes no further,volumio.local does not work also inputting the the IP address in but it’s just the same.when I put a different 16gig sd card with a older image on it works the way it’s supposed to.
|
|
|
|
Post by MartinT on Dec 1, 2020 19:51:25 GMT
You can definitely use a 32GB microSD card. I suggest you try a different card since the one you're using may be corrupted.
What do you use to burn the image to card? Does it give any errors?
|
|
|
|
Post by naim1425 on Dec 2, 2020 0:22:25 GMT
It comes up with no errors,the volumio operating system loads,it’s only when I install Spotify connect. Etc and reboot digione ithe cursor just spins and does not boot up,so I connect to Spotify to the volumio digione cursor just spins.only happens after I install the Spotify’s and radio paradise,before I restart volumio I can connect to my network naw drives on the digione.I was wondering if it could be the latest image because if I use an older image it works fine on a different sd card,the 32 gig card is a new Kingston card which I have formatted to fat 32.I’ve tried Volumio.local/ and going into the router to see what,s connected,,like I said I can change the settings in volumio it’s just does not start up after installing the programs.
|
|
|
|
Post by John on Dec 2, 2020 4:25:00 GMT
What is the install number I had to update mine yesterday as Spotify would not work on it so worth check-in to see if their is already a update needed for it
|
|
|
|
Post by MartinT on Dec 2, 2020 6:25:53 GMT
Check the router in case the Volumio normally picks up a different IP address after restarting? It might just be somewhere else. volumio.local/ I found doesn't always update immediately so you might find it's gone to, for instance, 192.168.1.101 but the router will tell you what's connected under DHCP. |
|
|
|
Post by naim1425 on Dec 2, 2020 9:45:57 GMT
sorry Martin the image burner i used was balenaEtcher
cheers
Alan
|
|
|
|
Post by naim1425 on Dec 2, 2020 9:47:03 GMT
i will give it a go,thanks
|
|
|
|
Post by naim1425 on Dec 2, 2020 9:52:07 GMT
What is the install number I had to update mine yesterday as Spotify would not work on it so worth check-in to see if their is already a update needed for it John, this is the image i burnt volumio-2.853-2020-11-20-pi.img
cheers
|
|
|
|
Post by Slinger on Dec 2, 2020 15:43:50 GMT
Just to bring this up to date as far as stable releases are concerned: Update v2.853
IMPORTANT: This release contains a new implementation of TIDAL and QOBUZ. You need to re-login again into your TIDAL or QOBUZ account to use them. If something is not working properly for you, you can disable the new implementation from Sources Settings, by setting Enable Experimental TIDAL and QOBUZ to off. FIXES
- Open Beta of new TIDAL and QOBUZ implementations enabled by default
- Fix REST API without user agent
|
|
|
|
Post by naim1425 on Dec 2, 2020 16:34:13 GMT
Sorted,I just put an old image on and updated it from the digione also done the Spotify insterlations separately and rebooted now it works,connected directly to the volumio.local
|
|
|
|
Post by MartinT on Dec 2, 2020 17:10:01 GMT
Yep, 2.853 is working very well for me. All Qobuz issues fixed.
|
|
|
|
Post by speedysteve on Dec 2, 2020 18:49:46 GMT
Spotify still doing it's play the next track thing.
I use Spotify connect if playing any serious amount of Spotify.
As John says the Spotify app interface is so much better.
I know they are working on Tidal connect.
Would be great with a Qobuz connect. The app is really nice to use.
Bring able to sort playlists names manually is great (can't do that in Spotify).
Ever hopeful.
|
|
|
|
Post by naim1425 on Dec 2, 2020 19:36:09 GMT
in Volumio settings how do i get it to run on the hardware setting instead of software or none,Im using none at the moment
Cheers
Alan
|
|
|
|
Post by MartinT on Dec 2, 2020 21:08:16 GMT
I use the mixer setting 'None' on mine as I use my DAC's volume remote control.
'Hardware' I believe only works if it senses a volume controllable DAC.
|
|
|
|
Post by wannarock2 on Dec 2, 2020 21:15:27 GMT
Interesting, I have to have Hardware checked ✓ on mine for no DAC volume control. When ‘None’ is checked ✓ my volume is cut by 1/3 from my streamer. I use Hardware control.
On my Volumio Version it is –
General Playback Options > Mixer Type > (drop-down box check ✓ ‘Hardware’)
|
|
📶NAS > Gustard x26p DAC > Benchmark LA4 Pre-Amp > NAD M22-V2 Amplifier > Revel F228Be Speakers