Post by Deleted on Jan 30, 2018 17:16:10 GMT
Well I took over to Holland a few bits of kit by the Channel Tunnel.
The weather was dreadful rain and more rain with gale force winds.
A two que around Antwerp after leaving home driving through bad lighting on roads in France the into my beloved Belgium to 4 hours to join.
I left home at midnight and the Flu Bug was still trying to kill me and got to Ede in Holland at 11.00AM local time.
Received a very warm welcome from Louis who owns Artspeak in Holland with hot coffee and cheese.
Then arrived Bryan and Kelly a charming couple and greeted my like a old friend, smashing.
We then had a listen to the EWA products.
1 M100 Pro a 100W/ch dual mono power amp with balance and unbalanced inputs
2 M50 Pro a 50W/ch stereo power amp with balance and unbalanced inputs
2 M50P Pro a 4 line input pre with a simple monitor DAC and balance and unbalanced out.
We also had a great performance from Louis on the Roland drum kit that was amazing.
Here is the M50P Pro
The M50 Pro
And the beast M100 Pro
So comments please on style would be most welcome.
Not powder coated but hard black anodized. And solid Aluminium Knobs, transistor are on ceramic heat spreader and the pre has SECA Headphone output stage at 2W.
When OFF and in idle mode the pre has a low voltage power on circuit from +-25V to +-5V to keep caps formed in psu stage, this also helps to reduce the misused start up sequence of pre then power thump.
So on standby the pre takes about 2W and full ON 25W.
The power amps are based on the same design as the Q20 but the M100 has 16 output devices and driver/ch and the M50 has 8 sets/ch.
Also note the transistor are rated at 150W and max current each of 16A,
The M100 pro is a bridge amp.
The head phones amp in the pre is a SECA design based around my 20W and 50W design but smaller.
The weather was dreadful rain and more rain with gale force winds.
A two que around Antwerp after leaving home driving through bad lighting on roads in France the into my beloved Belgium to 4 hours to join.
I left home at midnight and the Flu Bug was still trying to kill me and got to Ede in Holland at 11.00AM local time.
Received a very warm welcome from Louis who owns Artspeak in Holland with hot coffee and cheese.
Then arrived Bryan and Kelly a charming couple and greeted my like a old friend, smashing.
We then had a listen to the EWA products.
1 M100 Pro a 100W/ch dual mono power amp with balance and unbalanced inputs
2 M50 Pro a 50W/ch stereo power amp with balance and unbalanced inputs
2 M50P Pro a 4 line input pre with a simple monitor DAC and balance and unbalanced out.
We also had a great performance from Louis on the Roland drum kit that was amazing.
Here is the M50P Pro
The M50 Pro
And the beast M100 Pro
So comments please on style would be most welcome.
Not powder coated but hard black anodized. And solid Aluminium Knobs, transistor are on ceramic heat spreader and the pre has SECA Headphone output stage at 2W.
When OFF and in idle mode the pre has a low voltage power on circuit from +-25V to +-5V to keep caps formed in psu stage, this also helps to reduce the misused start up sequence of pre then power thump.
So on standby the pre takes about 2W and full ON 25W.
The power amps are based on the same design as the Q20 but the M100 has 16 output devices and driver/ch and the M50 has 8 sets/ch.
Also note the transistor are rated at 150W and max current each of 16A,
The M100 pro is a bridge amp.
The head phones amp in the pre is a SECA design based around my 20W and 50W design but smaller.
