|
Post by brian2957 on Mar 24, 2015 8:56:09 GMT
I bought one of these little beauties from one of the troops a couple of weeks ago www.ebay.co.uk/itm/25VA-24V-Hifi-linear-power-supply-amp-DAC-external-PSU-with-display-/111591718795?pt=LH_DefaultDomain_3&hash=item19fb627f8b and I'm using it ( set at 13.5 V ) with my Amptastic Mini-1 . This little Chinese PSU is an audible improvement compared to the one which is supplied with the Mini-1 . For some reason the seller doesn't inform prospective buyers that the voltage of these PSUs are adjustable . I had a play this morning and was able to adjust the output on mine down to 5V and up to 24V . So it seems that they can be used with a variety of kit . Furthermore it's a 20 minute job at most . The adjustment is made via a little brass screw to the rear of the transformer . Sorry , but I'm not an electronics engineer ( nor a photographer for that matter ) so I don't know what parts are called ,and it requires the minimum of tools , a Philips screwdriver , a little flat headed screwdriver , and an Allen key ( £1 shop specials ) The DC cable can also be improved making another audible upgrade .
|
|
|
Post by MikeMusic on Mar 24, 2015 9:37:39 GMT
Thanks Brian. I could need that if my Ankaka goes
So even easy enough for a Muppet to adjust ?
|
|
|
Post by canetoad on Mar 24, 2015 9:56:17 GMT
It's a variable resistor Brian. Thanks for the information, it was just what I was after. I'm thinking about a PSU to use with a Raspberry Pi media server.
|
|
|
Post by Eduardo Wobblechops on Mar 24, 2015 10:25:07 GMT
Bear in mind this will have a lower amperage the higher the voltage is set, so make sure whatever you are feeding isn't trying to pull more current than the supply is capable of providing.
|
|
|
Post by MartinT on Mar 24, 2015 10:30:47 GMT
The adjustment is a trim potentiometer.
Also - check that transformer. The Chinese are notorious for having their primaries set for 220V AC, which normally is easily within tolerances for a nominal UK voltage of 240V. However, if like me your house is supplied with around 250V and you're pulling close to maximum current then the PSU is going to suffer from overheating and possible failure. Just a gentle warning.
Saying that, the units look nice for the price.
|
|
|
Post by brian2957 on Mar 24, 2015 10:50:46 GMT
Not sure if it's 220V or not Martin . My mains can also go a bit high ( 249V at times ) however the PSU , which is on all day , from 830am until around midnight , when I'm at home runs very cool all day .
|
|
|
Post by MartinT on Mar 24, 2015 11:13:35 GMT
Not sure if it's 220V or not Martin It is! It says so in the top photo.
|
|
|
Post by brian2957 on Mar 24, 2015 11:24:32 GMT
Thanks Martin , I wouldn't know the difference if it fell out the sky and hit me on the head mate
|
|